Turning Equipment:

(1)	Mori-Seiki NL1500-Y CNC Turning Center 6" Chuck; Live Tooling; Y-Axis, High Pressure Coolant/ Chip Blaster 5C and 16C Collet Adapters
(1)	Mori-Seiki SL154-Y CNC Turning Center 6" Chuck; Live Tooling ; Y-Axis; High Pressure Coolant/ Chip Blaster Iemca 48" Bar Feeder
(1)	Tsugami BE20V CNC Swiss Turning Center
	20mm, Live Tooling
(1)	Mori-Seiki SL300-BMC CNC Turning Center 12" Chuck; Live Tooling
(1)	Mori-Seiki SL200 MC CNC Turning Center 8" Chuck; Live Tooling; Bar Feeder (w/2" diameter capacity)
(3)	Mori-Seiki SL25 CNC Turning Center (1) 10" Chuck with extended bed (2) 8" Chuck
(1)	Mori Seiki SL35 CNC Turning Center 15" Chuck
(1)	Mori-Seiki CL200A CNC Turning Center 8" Chuck
(1)	Mori-Seiki SL15 CNC Turning Center 6" Chuck
(5)	Mori-Seiki AL2 CNC Turning Center 6" Chuck
(3)	Warner & Swasey 2-SC CNC Turning Center (3) 15" Chuck; 50 hp
(1)	Hyundai/KIA SKT300 CNC Turning Center
	12" Chuck

 

Milling Equipment:

(1)	Mori-Seiki SH500 HMC CNC Horizontal Machining Center 500 Size Table, 1 Degree Increments
(1)	Mori-Seiki NV5000-B Table: 52" x 24 CNC Vertical Machining Center Full 4th axis, high pressure coolant through spindle 14,000 rpm
(1)	Mori-Seiki SV503B Table: 40" x 20"; CNC Vertical Machining Center Full 4th Axis; w/High Pressure Coolant
(1)	Haas VF-6 Table: 64" x32"; CNC Vertical Machining Center Full 4th Axis; Coolant through Spindle; Renishaw Probe
(1)	Haas VF-6/50 Table: 64" x 32"; CNC Vertical Machining Center Full 4th Axis; w/ coolant thru the spindle; 50 Taper
(1)	Haas VF-4 Table: 50" x 25"; CNC Vertical Machining Center Full 4th Axis
(1)	Mori-Seiki MV-55 Table: 40" x 20" CNC Vertical Machining Center Full 4th Axis

 

Drilling & Tapping Equipment (light-duty milling):

(1)	Brother TC-S2A-0 Table: 31.5" x 12.6"; CNC Drilling & Tapping Center Full 4th Axis; Light duty milling
(1)	Brother TC-225 Table: 23.6" x 11.8" CNC Drilling & Tapping Center Full 4th Axis
(1)	Brother TC-215 Table: 19.6" x 8.6" CNC Drilling & Tapping Center Full 4th Axis

 

Support Equipment:

• Hem H105 Automatic cut-off saw 15" diameter capacity
• Sunnen Honing Machine
• Hardinge Super Precision Hand Chucker (3 units)
• Hardinge Inch-Metric Tool Room Lathe
• Hardinge Turret Lathe
• South Bend Engine Lathe
• Bridgeport Vertical Milling Machine
• Gorton Mastermill Vertical Milling Machine
• Famco Vertical Milling Machine
• Kearney & Trecker Horizontal Milling Machine
• Cincinnati Horizontal Milling Machine
• Wotan Horizontal Milling Machine
• Various drill presses, saws, tapping machines, sanders, etc.
• Econoline Media Blasting Machine/Bead Blaster

Marking Equipment:

• Styliner Mark 4 Stylus Marking Machine - compatible with AutoCad and other HPGL graphics
• Telesis pin stamp marking machine

Inspection Equipment:

• Brown & Sharpe 7-10-7 DCC Coordinate Measuring Machine
• Mitutoyo B-241B Coordinate Measuring Machine
• OPG Bench-top contour projector optical comparator
• Scherr-Tumico Optical Comparator
• Complete Sunnen bore gage system
• Federal air gages
• Mueller pin gage system
• Hommel T-500 surface analyzer
• Customary thread, groove and other miscellaneous gaging equipment

Air Compression Equipment:

• 50 HP Quincy Air Compressor with 30 HP Quincy back-up
  

 

 

 

© Copyright 2002 Bothe Associates Inc.